Ansichten:

Question: 

How to get recorded data from a 43x series i instrument ?


Answer: 

Power Log was used to download from a number of instruments, when series ii of the 43x family was introduced, it became difficult to maintain one version and after v4.4, Power Log was split into two versions.https://www.fluke.com/en-gb/support/software-downloads/fluke-powerlog-application-softwarev4.x, also known as “Power Log Classic” continues with the older instruments (345 / VR1710 / 1735 / 43x series i)V5.x, is for 43x series ii, (firmware v5.02 and above) The two programs use different file formats :   Power Log 4.x reads *.fpq files whereas Power Log 5.x reads *.fpqo files.

 

The interface cable (OC4 USB rev ii) is IR to USB, its drivers will install as a virtual com port, to be recognized by Power Log it should appear in Device Manager in the range Com 3 to Com 8 inclusive.
https://dam-assets.fluke.com/s3fs-public/CDM2.04.16.exe


On the 43X series i
Press  MEMORY  and  F1 – RECALL/DELETE
Use arrow keys to highlight the required data and press  F5 - USE

In Power Log
If the port in use does not already appear in the field (orange ellipse), select it from the list off the drop down arrow at the end of that field.  Initiate the download from the square button to the right (red square).
Bar chart<br><br>Description automatically generated