The Fluke 754 Documenting Process calibrator has device specific support for these devices:
ABB 754 Firmware 1.06 & 1.16 - HART Support
- 600T Rev 5.1, 5.2, 5.3
- 658T Rev 5.1 No Sensor Trim
Abb (Elsag Bailey)
- AS800 Rev 5.2
Anderson Instruments
- ANDRSN1 Rev 5.1
Endress & Hauser
- Cerabar S Rev 5.1
- Cerabar M Rev 5.1, 5.5, 5.7
- Deltabar S Rev 5.1, 5.2, 5.5, 5.7
- TMT122 Rev 5.2 No Sensor Trim
- TMT162 Rev 5.1 No Sensor Trim
- TMT182 Rev 5.2 No Sensor Trim
Fuji
- FCX-A/C Rev 5.1
- FCX-A2/C2 Rev 5.1, 5.2
- FRC Rev 5.1
Foxboro
- I/A Pressure Rev 5.1, 5.2
Foxboro Eckardt
- TI/RTT20 Rev 5.1 No Sensor Trim
Honeywell
- ST3000 Rev 5.1, 5.2, 6.4
- STT25H Rev 5.1 No Sensor Trim, 5.2 No Sensor Trim
- STT25T Rev 5.1 No Sensor Trim
Invensys
- I/A Pressure Rev 5.1
Micro Motion
- MVD 2000 Rev 5.2 No Sensor Trim, 5.3 No Sensor Trim
- MVD 2000IS Rev 5.2 No Sensor Trim, 5.3 No Sensor Trim
- 9701 Rev 5.1 No Sensor Trim
- 9712 Rev 5.2 No Sensor Trim
- 9739 Rev 5.1 No Sensor Trim, 5.2 No Sensor Trim, 5.3 No Sensor Trim, 5.4 No Sensor Trim
Prime Measurement
- 344 Rev 5.1 No Sensor Trim, 5.2 No Sensor Trim
Rosemount
- 1151 Rev 5.4, 5.5, 5.6
- 2051 Rev 5.9, 7.10
- 2088 Smart Rev 5.3
- 3001C HTG Rev 5.2
- 3044C Temp Rev 5.1, 5.2
- 3051C Rev 4.1, 5.2, 5.3, 5.6, 5.7, 5.9, 7.10
- 3051C LP Rev 5.1
- 3051S Diag Rev 5.3, 7.4
- 3144 Temp Rev 5.1, 5.2,5.3, 5.4, 5.5, 7.6
- 3244 Temp Rev 5.1, 5.2
- 644 Temp Rev 5.3, 5.4, 5.5, 5.6, 5.7, 5.8
- 2088 – Rev 5.9 and 7.10
- 2090 – Rev 5.9 and 7.10
- 4600 – Rev 5.1
Siemens
- Sitrans P DS Rev 5.1
- Sitrans P ES Rev 5.1
Smar
- TT301 Rev 5.2 No Sensor Trim
- LD301 Rev 5.3
Viatran
- I/A Pressure Rev 5.1
Yokogawa
- EJA Rev 5.1, 5.2
- YTA Rev 5.1, 5.2
Wika
- UniTrans Rev 5.5 No Sensor Trim, 5.6 No Sensor Trim, 6.6 No Sensor Trim
- T32 Rev 5.1 No Sensor, 5.2 No Sensor Trim