This Article is listing the model numbers of the current probe adapters and the current clamp model numbers that are compatible with the adapters along with the setting adjustments in the Fluke-173X Series, Fluke-174X Series and Fluke-177X Series.
The Fluke-1773, Fluke-1775 and Fluke-1777 are the only ones that support DC Current probes.
Item 5363472 17XX-CLAMP-ADPT-1V, 17XX BNC ADAPTER FOR CLAMPS 1mV/A, MAX. 1V
https://www.fluke.com/en-us/product/accessories/adapters/fluke-17xx-clamp-1v
Item 5363485 17XX-CLAMP-ADPT-2V8, 17XX BNC ADAPTER FOR CLAMPS 1mV/A, MAX. 2.8V
https://www.fluke.com/en-us/product/accessories/adapters/fluke-17xx-clamp-adapter-2-8v
The first adapter is designed for use for current clamps with an output maximum value of 1V AC/DC.
The second is designed for use with current clamps with an output maximum of 2.8V AC/DC.
A range of Fluke devices have been tested with the instrument; this information is included in the product instructions. The information includes the correct current ratio to be set in the instrument along with the maximum output voltage. Users should consult this table before ordering the adapter (and current clamp).
Below is a table from the Clamp adapters instruction sheet showing the model numbers of the current probes that are compatible with the two current probe adapter cables, the Ranges and the Scale Factor. The Fluke-1730, Fluke-1740 and Fluke-1770 Series setups will have Current Ratios while the manual states Scale Factor.