The DB15 electrical/data cable to go from a molbox to a molbloc is part #3068683.
*** This is a standard DB-15 male to DB-15 female in 6 foot length if you would like to purchase them locally/from another vendor.
Part Number: 3068683
Description: CABLE, MOLBOX TO MOLBLOC, DB15M-DB15F, 6FT
The pressure tubes that go from the molbox quick connect pressure ports are part #3069560. This part number will include two pair of pressure tubes (four tubes total) so will have a full set to connect both channel A and B to a molbloc. Each pair has one tube color coded red and another blue to be able to match the color coding on the molbox/molbloc pressure ports to help ensure connected properly. Each will have the self sealing quick connect on each end and come assembled. Since assembly is required by our Production group there can be some lead time for these.
If looking for just the tubing without the quick connects for custom applications we sell it per centimeter (cm) under part number 3232553.
*** The tubing used is PTFE with a 1/8in outside diameter but has an uncommon small inside diameter of .030in (1/32in). Standard length of the tube is 1m/3.3ft long. This is NOT standard 1/8 inside diameter tubing and we recommend using this smaller inside diameter tubing. We highly recommend the standard length too but also that it not exceed a maximum of 2 meters / 6ft long if must go longer. Custom shorter tubes of equivalent or less total volume (including larger inside diameter) would be ok but typically this is not practical in most applications as could get really short. The quick connects with self sealing valves are Swagelok part SS-QM2-D-200 and could be acquired locally. We use custom heat shrinking on the quick connects to color code each tube red or blue but there are other ways to label them on your own if desired like adding a label wrapped around the tube.
Part Number: 3069560
Description: PRESSURE LINE, MOLBOX TO MOLBLOC (SET OF 2), 1M (3.3 FT)
Part Number: 3070259
Description: PRESSURE LINE, MOLBOX TO MOLBLOC, SET OF 2, 6 FT (1.8M)
The pressure tube connections mounted on the back of the molbox are part 3134621. It is rare to need to replace these.
*** If would like to acquire these directly from the OEM they are Swagelok part SS-QM2-B1-200
To place order or get an official quote for any of the above call +1.877.355.3225 and ask for Orders group or email orders@fluekcal.com.