molbox1+ Parts

Pressure Tubes and Electrical Cables:

See this article for full details https://my.fluke.com/en-us/article/KA-03608

Display Replacement:

See this article for full details: https://my.fluke.com/en-us/article/KA-03025

Feet:

Feet on older molbox1+ terminal are different if do not appear as shown in the picture below. The enclosure was changed so the feet also changed.

The tilting portion of the front foot to order is below part:
Part: 2650711
Item Desc :WT-630564,TILT STAND
*** These are sold individually so would need quantity of 2 if want new set. They are inserted into the fixed foot so would also need that part below if wanting to replace them also.

The front and rear fixed feet are:
Part: 868786
Item Desc :5700A-2043-01 ,BOTTOM FOOT, MOLDED, GRAY #7
*** These are sold individually so would need quantity of 4 if want full new set.

*** FYI, both these parts are used on many products like molbox1+, newer PPC4 enclosures, 6270A/8270A/8370A, as well as products from other disciplines like electrical and temperature products.

Power Supplies:

*** These can be hard to install so recommended to send in for repair

Replacing either of the older power supplies requires replacing both power supplies and replacing the power cable.

Part: 5605160

Descr: MOLBOX1+,U05252,ASSY,CABLE,POWER

Part: 5605172

Descr: POWER SUPPLY,SW,70W,90-264VAC,5V@14A,4KV,CHASSIS MOUNT,127X76X31MM

Notes: Replaced PN 3136311, 5V power supply in molbox1+ and is 5V PS in molbox2

Part: 5605185

Descr: POWER SUPPLY,SW,76W,90-264VAC,12V@6.3A,4KV,CHASSIS MOUNT,127X76X31MM

Notes: Replaced PN 2184887, 12V power supply in molbox1+ and is 12V PS in molbox2

Fuse:

Part: 5341255

Item Desc :FUSE,5X20MM,1A,250V,SLOW BLOW,HIGH MELT

Colored Bands for Pressure Tube Connections:
The same bands are used on the molbox and molbloc connections as well as the Pressure Tube ends.

Part: 3232509
Item Desc :102431-Z,TBG, HEAT SHRINK 1/2IN RED

Part: 3232511
Item Desc :102432-Z,TBG, HEAT SHRINK 1/2IN BLUE

Keywords: molbloc, molstic